The meaning of the drive letters depends on the target architectures. However, on most target architectures, drive A is the first floppy drive, drive B is the second floppy drive (if available), drive J is a Jaz drive (if available), and drive Z is a Zip drive (if available). On those systems where the device name is derived from the SCSI id, the Jaz drive is assumed to be at Scsi target 4, and the Zip at Scsi target 5 (factory default settings). On Linux, both drives are assumed to be the second drive on the Scsi bus (/dev/sdb). The default settings can be changes using a configuration file (See section How to configure mtools for your environment).
Go to the first, previous, next, last section, table of contents.