|
|
| Option | Meaning | Default |
|---|---|---|
ABORT-100
| Kills an avalanche at size 100 | No |
ABORT-1000
| Kills an avalanche at size 1000 | No |
ABORT-10000
| Kills an avalanche at size 10000 | No |
ATTACHMENT
| Include attachment | If data present |
CROSS-INDUCED
| Requests cross induced signals | Yes |
DIRECT
| Computes only direct signals | No |
ELECTRON-PULSE
| Add signals due to electrons | No |
ION-TAIL
| Add signals due to ions | Yes |
NOATTACHMENT
| Don't include attachment | If data absent |
NOELECTRON-PULSE
| Do not compute electron signals | Yes |
NOION-TAIL
| Do not add signals due to ions | No |
NOPLOT-ELECTRON
| Don't plot electron drift lines | Yes |
NOPLOT-ION
| Don't plot ion drift lines | Yes |
NOTOWNSEND
| Don't include multiplication | If data absent |
PLOT-ELECTRON
| Plot electron drift lines | No |
PLOT-ION
| Plot ion drift lines | No |
TOWNSEND
| Include multiplication | If data present |
The TOWNSEND and ATTACHMENT options can only be selected if the corresponding data has been entered in the gas section.
See the CROSS-INDUCED option of the SIGNAL command for the distinction between direct and cross induced signals.
A plot frame (e.g. with PLOT_DRIFT_AREA) has to be opened before the call to AVALANCHE_SIGNAL if you wish to use the PLOT-ELECTRON or PLOT-ION options.
Formatted on 15/01/01 at 23:07.